2014 Jeep Grand Cherokee Battery Location [Complete Guide]

The 2014 Jeep Grand Cherokee may be a reasonably dependable car. But it has battery-related problems that are inevitable like in other vehicles. 

Some owners might come to face a scenario wherein their vehicle simply clicks and does not start up. This usually means that it is a case of a flat battery. 

In this blog, we will look at the battery in a Jeep Grand Cherokee and suggest ways in which one might overcome common battery issues.

Battery Location in the 2014 Jeep Grand Cherokee

A crucial thing to understand regarding the 2014 Jeep Grand Cherokee is that its Battery is mounted underneath the passenger’s chair. 

This makes it slightly different from several vehicles which have the battery positioned under the hood. 

To reach the battery, first, move the passenger seat ahead and detach the battery cover.

Steps to Access and Replace the Battery

1. Move the passenger seat to the furthest front position to reach the battery compartment
2. Push the cover to remove it: This depends on how the vehicle has been set up, some will require you to unscrew it while others will require unclipping it.
3. Remove the negative terminal first and then the positive terminal to prevent any electrical shorts.
4. Lift the old battery out of its holder and locate the new one inside the tray properly preventing it from moving enough.
5. Fix the positive terminal down followed by the negative terminal.
6. Now secure the cover and reposition the passenger’s seat’s rear end backward.

Common Battery Problems and How to Fix Them

Still, there are other types of Jeep Grand Cherokee battery problems that you might come across apart from a dead battery. 

These are a few typical battery-related difficulties and how to fix them to tackle these challenges:

1. Battery Discharge Issues

A good number of owners have Jeep problems because their batteries run flat quickly anytime the vehicle is not driven or in instances of short trips. 

You might consider the following to avoid the problem:

• Once a month, charge your battery with a battery charger of good quality.
• If you intend to leave your car standing for a long time, buy a trickle charger.

2. Corrosion on Battery Terminals

With time, corrosion may form on the battery terminals, which can weaken the connection and performance. 

To clean the terminals, follow these steps:

• Take apart the battery terminals.
• Combine baking soda and water and use it to scrub the terminals and remove the corrosion.
• After that, rinse the residue with clean water and make sure the terminals are completely dried s before connecting the battery.

3. Weak or Failing Battery Symptoms

If your Jeep runs but is probably taking longer than usual to start. If the lights appear flickering or dim, it is a clear indicator that your battery is flat.

Here’s how to test:

• Get a multimeter and connect it to the voltage tab. This should be close to 12.6 for a well-charged battery.
• If the voltage drops below twelve point four then the battery should be recharged or replaced without hesitation.

4. Battery Replacement Recommendations

The challenge of battery replacement is choosing the best one available in the market. 

The 2014 Jeep Grand Cherokee requires:

• For the 3.6-litre gas engine, it’s best to go for a group 48 (H6) battery.
• In the case of a vehicle with a 5.7 liter Hemi V8, it can use the same Group 48 (H6) battery.
• Make sure the specific cold cranking amps (CCA) are sufficient for the relevant climate.

Final Thoughts

In conclusion, regular checking of the car’s battery must be done to enhance its lifespan and efficiency. 

Having regular maintenance, replacing batteries on time, and having information on where the battery is located can spare you from inconveniences. 

If you are not confident about the battery issues yourself, consult a professional mechanic to do things safely.

FAQs

Where is the battery located in my 2014 Jeep Grand Cherokee?

The battery of a 2014 Jeep Grand Cherokee can be found in the engine compartment beneath the bonnet. 

To access the engine compartment, lift the front hood. The battery is on the driver’s side of the car towards the front of it and is within the plastic battery tray. 

You will note the rectangular box has two terminals. The terminal marked with “+” is the positive terminal, while the negative terminal is marked “-“. 

When doing battery maintenance, remember to always remove the negative terminal first. Working with batteries should be done with care and caution. 

If you are in a small space, make sure it is clean and well-ventilated while doing your task.

How to jump a 2014 Jeep Grand Cherokee?

The procedure for starting a 2014 Jeep Grand Cherokee with a dead battery can be easily completed. 

It involves the use of jumper cables and a running car there shouldn’t be a problem, but look at the steps to do the Jeep properly. 

Set the position of both vehicles in a way to make them close. Do not let them touch, Turn off the motor of both vehicles and get the keys out from the ignition. 

Using the red jumper cable, connect the dead battery’s positive terminal. To the working battery’s positive terminal, there’s Power Domination. 

Afterward, connect one end of the connect the negative wire to the battery. The second positive end to the terminal is located on the car which has not been painted preferably below the battery area. 

Run the working vehicle for a few minutes and try starting the jeep once more.

Why won’t my 2014 Jeep Cherokee start?

Multiple factors can be responsible when your 2014 Jeep Cherokee is unable to crank. The first concern should be the dead battery. 

Most likely the problem is a dead/ weak battery. Keep these firmly attached and clean.

Then, move on to the fuel system. 

Check whether fuel is in the tank and whether the fuel pump is working. 

If all is fine otherwise, and you still cannot hear a humming noise when the key is turned, it is likely to be defective. 

Then the starter motor must also be checked. Click sound can be one of the defective signs. Lastly, check the entire dashboard warning lights. 

These indicators can resolve other critical electrical and sensor problems. If in doubt do not try to use mechanics anywhere, just consult a specialist.

How many batteries are in a 2014 Grand Cherokee?

Only 1 battery is visible in the Jeep Grand Cherokee 2014 of all models. 

This battery is reliable for stabling engines and consists of a 12 Volt Lead Acid type of battery being connected to a spark plug and electrical appliances.

Other models like EcoDiesel engine models have additional batteries to help in the functioning of the aux power system.

This second battery facilitates the operation of the stop-start system as well as other electrical components.

As a rule, one battery is sufficient for the functional operation of most conventional models.

Does a Jeep Cherokee require a special battery?

The Jeep Cherokee is not dependent on any specific battery but needs batteries with certain specifications. 

A majority of the models use either a Group 24 or Group 34 battery depending on the engine and trim package. 

Consider how many cold cranking amps are required by the battery in the geography being used and the road conditions to be faced. 

Likewise, a battery with a better warranty and reliability should be purchased. 

When changing the battery, the ‘load’ of the car, including possible extra features, will have to be taken into consideration. 

The correct battery will enhance the operational efficiency and durability of the Jeep Cherokee.

How many volts is a Jeep Grand Cherokee battery?

Most Jeep Grand Cherokees are fitted with a 12-volt battery, which is common in contemporary cars. 

Such batteries are standard in most automobiles manufactured these days. It has the requisite energy to start the ignition and make electric circuits operative. 

This is an automotive lead-acid battery. A healthy battery should ideally have a voltage close to 12.6 volts when fully charged. 

A voltage drop below 12.4 volts may indicate that the charge is weak. When the engine is running, the alternator helps to hold the battery voltage from 13.7 to 14.7 volts which helps to provide the best usage. 

Always examine the battery and the connections for corrosion or any physical limitations.